Windows 10 System Image Backup Not Working : Solved

  

Written By Kristian Wilson

Approved By Marco Devin  

Published On March 2nd, 2022

If your Windows 10 System Image Backup Not Working properly, then you are on the right page.

Creating backups and upgrading them on a routine basis is one of the most effective ways to protect your data from being lost in the event of a data loss. You may use this method to restore from any type of data loss event that occurs as a result of a system failure or damage/corruption of the system.

For those of you who have been unsuccessful to restore or make a System Backup on your Windows computer owing to an error message, please read this post for instructions for Windows 7 to create a system image backup that failed with simplicity.

Free Methods for Windows 7 Backup Not Working

Here we will show 10 manual methods, which come with some limitations for Fix Windows 10 system image backup not working. All steps and limitations are mentioned below one by one:

Method 1: Delete WindowsImageBackup Folder

Due to the presence of prior backup files on your machine, users may not be able to perform a system backup. Because of this, if you want to solve the Windows 10 system image backup error, users have to clear out the WindowsImageBackup folder and all its contents.
WindowsImageBackup folders may be moved if you do not wish to lose your previous backups. Follow these steps to do so:

• Location of WindowsImageBackup: – C:\System Volume Information\
• Search and delete the WindowsImageBackup option.

Method 2: Remove EFI and Recovery Partition

Certain sectors from earlier Windows versions may remain on your system when you update to Windows 10 or install it on a new hard disk. That is what is triggering Windows 7 to create a system image backup failed.

So, you need to remove EFI and recovery partition for the Windows 10 system image backup not working. Follow all the steps, which are given below:

1. Click on the “Windows + X” key.
2. Now choose the “Disk Management” option from the list.
3. Now a “Disk Management Window” will appear and choose the required hard drive, where you want to save the system backup.
4. Next, you will get EFI System Partition and Recovery Partition and delete both of them.

If still Windows 7 backup not working. Then go for the next method.

Method 3: Shutdown Unused Disk Tools for Windows 10 System Image Backup Not Working

Sometimes, certain disc utilities might cause problems with the system backup. So, the system backup problem on a Windows 10 system may occur then may of this. Consequently, if you are currently utilizing any disc cleaning tools or disc optimizers, you should first deactivate them and then attempt to conduct another system backup as described above.

Method 4: Run the chkdsk command for Windows 10 Automatic Backup Not Working

Sometimes, some corrupted and damaged files are available on the hard drive. Due to this reason also Windows 10 system image backup not working. To repair these damaged files, with the chkdsk command all steps are given below:

1. Search “CMD” into the search box.
2. Click on the Ctrl + Shift + Enter keys to open the command prompt in the admin mode.
3. Now type the mentioned command.

Important Note: Note: Replace “D” with the letter representing your computer’s hard disc partition.

• Wait as this procedure will examine your whole hard disc for errors.
• Steps to solve “Unable to restore System Backup due to an Error” on all hard disc sectors.

Method 5: Activate System Protection for System Image Backup Failed Windows 7

Sometimes, enabling system protections are required while making system backup for Windows 10 system image backup not working.

1. Search Windows on the search box and choose “System”.
2. Now select “System Protection”.
3. Next, navigate the “Windows 10 System Image” and configure it.
4. Enable the “Turn on System Protection” option.
5. Lastly, press on the “Apply” and “OK” icon.

Method 6: Deactivate System Protection

In some situations, users face an error to deactivate the system protection. So, follow the previously mentioned 4 steps, after that choose the “Disable system protection” option and then press on the “Delete” icon.

Now maybe, your error will solve to Windows 10 system image backup not working.

Method 7: Change Disk Space Consumption

The System Protection settings may prohibit you from building a system backup. So, manually changing System Protection settings is advised. Follow these steps to do so:

1. From the “System Protection” option, choose the “Disk Volume” that you will be using for the system image and the “Configure” icon.
2. Enable the protections, if it is off.
3. From the Disk Space Usage section, change the Max Usage slider left around 10-20%.
4. Lastly, press on the “Apply” >> “OK” button.

Now restart the machine, and again check the error.

Method 8: Format Hard Drive for Windows 7 Backup Not Working

You must format your hard disk before taking a backup of your system image. But must remember to take the copy of your data into a safe location.

1. From the file explorer, from the “This PC” option.
2. Click right on the required External hard drive and choose the “Format” option from the list.
3. Now from the appearing screen, enable “Quick Format” and press on the “Start” button.

After complete formatting, again try to take a backup of your system image for Windows 10 system image backup not working.

Method 9: Remove EPI Partition with Diskpart

The old EFI sector on the old hard disk may be still there if you’ve installed a newer Windows on a new hard drive and replaced the old hard drive. It may also create issues for Windows 10 system image backup not working.

1. Go to cmd and Ctrl + Shift + Enter key for admin mode.
2. Now type diskpart command in the cmd and then “Enter”.
3. Next, type “List Disk” and enter the key.
4. After that, you will complete a list of the hard disk of your machine.
5. Choose the required hard drive and type select Disk n (replace n with your selected disk).
6. Next type “List Partition” and enter, and then check the needed system partition and then type select Partition n.
7. Lastly, Type “Del Partition Override” and click on the Enter key.

Important Note: This is a difficult and perhaps dangerous procedure. Do it at your own risk, or do it with the assistance of a professional. Also, create a backup of all of the data on that sector since they will all be wiped if you don’t.

Limitations of Manual Methods

• The possibility of data loss is extremely high.
• These procedures can only be used by those who have technical expertise.
• Additionally, users must be familiar with the cmd language.
• No assurance can be given that manual procedures will be effective and efficient. And provide a 100 percent satisfactory outcome.
• Methods that are lengthy, time-consuming, and prone to confusion.

Time to say goodbye

As you can see, in this write-up, we explained complete details on why Windows 10 system image backup not working while taking backup. Here you will get 9 manual and free methods for Windows 7 backup not working. If still there is any problem you faced. Then you should take the help of third-party software.